RAM Memory Support
7KT333 - ACORP
AMD Socket A, Athlon XP/Duron Processor, VIA KT333 + 8233A, FSB 200/266 MHz, ATX, DDR333, AC'97 Sound, AGP 4X, Ultra DMA 66/100/133, WOA, WOM, WOL, Over Clock/Voltage, SP II
Building on the unprecedented power and reliability of the VIA Apollo KT333, the VIA Apollo KT333 further raises the performance bar on AMD Athlon™ XP and AMD Duron™ processor based systems. The VIA Apollo KT333 is the first VIA chipset to feature DDR 333 memory enabling stunning performance across the full application range.
FSB 200/266 MHz
Frontside bus: the bus within a microprocessor that connects the CPU with main memory. The so-called dual independent bus (DIB) architecture allows a processor to use both this and the backside bus (which connects the CPU and the Level 2 cache) simultaneo
DDR 200/266/333 MHz
Double Data Rate: a memory technology that works by allowing the activation of output operations on the chip to occur on both the rising and falling edge of a clock cycle, thereby providing an effective doubling of the clock frequency without increasing t
2 Channel AC'97 Sound
Audio Codec '97 (AC '97) defines a high-quality, 20-bit audio architecture for the PC that is used in the majority of today's desktop platforms. The AC '97 Component Specification version 2.3 is the next evolution of integrated analog audio.
AC '97 v2.3 is a big step in enabling true Plug and Play* audio for the end user. By providing parametric data about the analog device being used, the end-user's experience can be significantly enhanced.
Intelligent, dynamic audio configurations may be implemented, opening the door for innovative, integrated audio designs, and increased ease-of-use for the end user.
Ultra ATA/100 - expected to be the final generation of Parallel ATA interface before the industry completes its transition to Serial ATA - was announced in 2000. Also referred to as Ultra DMA mode 5, the new specification uses the same 40-pin, 80-conducto
Form Factor ATX
The predominant motherboard form factor since the mid-1990s. It improves on the previous standard, the Baby AT form factor, by rotating the orientation of the board 90 degrees. This allows for a more efficient design, with disk drive cable connectors near
PCI x 6
In its original implementation PCI ran at 33MHz. This was raised to 66MHz by the later PCI 2.1 specification, effectively doubling the theoretical throughput to 266 MBps - 33 times faster than the ISA bus. It can be configured both as a 32-bit and a 64-bi (IRQ's) to be shared. This is useful because well-featured, high-end systems can quickly run out of IRQs. Also, PCI bus mastering reduces latency and results in improved system speeds.
Intel's release of version 2.0 of the AGP specification, combined with the AGP Pro extensions to this specification, mark an attempt to have AGP taken seriously in the 3D graphics workstation market. AGP 2.0 defines a new 4x-transfer mode that allows four l benefit wasn't seen until the implementation of 133MHz SDRAM and Direct Rambus DRAM (DRDRAM ) in the second half of 1999. AGP 2.0 was supported by chipsets launched early in 1999 to provide support for Intel's Katmai processor.
RAM Memory Support
Manufacturer - downloads drivers, manuals and BIOS : ACORP
Prodejce v ČR : Možnost vložení odkazu prodejce - info zde
Recenze : Odkazy na recenze vložíme po dohodě
Problems, experience, griffs.....: