Ovladače + manuály + BIOSy Select by name mainboard motherboard Select by manufacturer mainboard motherboard Select by socket slot mainboard motherboard Select by chipset mainboard motherboard


Socket 478, Intel P4 (Northwood Processor support), Intel 845 + ICH2, FSB 400 MHz, ATX, DDR266 x 2, AC'97 Sound, AGP 4X, Ultra DMA 66/100, STR, WOA, WOL, WOM, Over Clock, SPII, VGA Protection


Optimally designed and extensively tested for the Intel® Pentium® 4 Processor, the Intel 845 chipset is designed to maximize the available bandwidth of DDR 200/266 or PC133 SDRAM for performance and mainstream systems.

FSB 400MHz
Frontside bus: the bus within a microprocessor that connects the CPU with main memory. The so-called dual independent bus (DIB) architecture allows a processor to use both this and the backside bus (which connects the CPU and the Level 2 cache) simultaneo
DDR 200/266MHz
Double Data Rate: a memory technology that works by allowing the activation of output operations on the chip to occur on both the rising and falling edge of a clock cycle, thereby providing an effective doubling of the clock frequency without increasing t

2 Channel AC'97 Sound
High-Quality Audio
Versatile I/O Capability
Cost Saving
Power Management
Driver/Software Support

UDMA 66/100
Ultra ATA/100 - expected to be the final generation of Parallel ATA interface before the industry completes its transition to Serial ATA - was announced in 2000. Also referred to as Ultra DMA mode 5, the new specification uses the same 40-pin, 80-conducto

Form Factor ATX
The predominant motherboard form factor since the mid-1990s. It improves on the previous standard, the Baby AT form factor, by rotating the orientation of the board 90 degrees. This allows for a more efficient design, with disk drive cable connectors near

PCI x 6
In its original implementation PCI ran at 33MHz. This was raised to 66MHz by the later PCI 2.1 specification, effectively doubling the theoretical throughput to 266 MBps - 33 times faster than the ISA bus. It can be configured both as a 32-bit and a 64-bi (IRQ's) to be shared. This is useful because well-featured, high-end systems can quickly run out of IRQs. Also, PCI bus mastering reduces latency and results in improved system speeds.

Intel's release of version 2.0 of the AGP specification, combined with the AGP Pro extensions to this specification, mark an attempt to have AGP taken seriously in the 3D graphics workstation market. AGP 2.0 defines a new 4x-transfer mode that allows four l benefit wasn't seen until the implementation of 133MHz SDRAM and Direct Rambus DRAM (DRDRAM ) in the second half of 1999. AGP 2.0 was supported by chipsets launched early in 1999 to provide support for Intel's Katmai processor.

CPU Support

RAM Memory Support

Manufacturer - downloads drivers, manuals and BIOS :  ACORP
Prodejce v ČR :  Možnost vložení odkazu prodejce - info zde
Recenze :  Odkazy na recenze vložíme po dohodě

Problems, experience, griffs.....:

DVD Videomusic.cz
filmy na DVD

Nabídka značkových nožů

Notebooky a PDA na ExpertShop.cz
Internetový Obchod
Parfémy - Internetový obchod